Gotoh delivers Japanese high-quality instrument parts to the world.
GOTOH GUT Co. began manufacturing stringed instrument parts in 1960 and is the only domestic machine head manufacturer in Japan. Their parts are sold worldwide and are consistently ranked at the top of the industry by musical instrument makers.
Machine Head Set for Classical GuitarLyra design Configuration: 3 Left / 3 Right Construction: Open Buttons: Plastic, white Gear ratio: 1:14 Shaft length (to string hole): 16.5 mm Bore: 10 mm Attachment: Screw Finish: Flash Gold Fixing screws included Made in Japan
For :EV510T, NS510T, 510T, VS100NVG300, VS401, VS401V Diameter :5.5mm
Bridge for T-Style modelsString-thru-body constructionString spacing: 10.8 mmDimensions: 79.8 x 101.5 x 6 mm6 steel saddlesScrews and springs made of steelElegant, warm, and powerful Tele-Twang with shimmering treblesColor: ChromeMade in Japan
Electric Guitar BridgeTOM-style bridge Tune-O-Matic Style Fits many guitars made in the Far East with large metric bolts (M8 thread) Dimensions (W x D x H): 84.5 x 14 x 12.6 mm Pin spacing: 74 mm Including M8 x 33.5 mm bolts and press-in bushings Finish: Chrome For guitars with a fretboard radius of 300 mm (12") Made in Japan
Electric Guitar BridgeTOM-style bridge Tune-O-Matic Style Fits many guitars made in the Far East with large metric bolts (M8 thread) Dimensions (W x D x H): 84.5 x 14 x 12.6 mm Pin spacing: 74 mm Including M8 x 33.5 mm bolts and press-in bushings Finish: Black For guitars with a fretboard radius of 300 mm (12") Made in Japan
This can be used for SLR (Strap Pin) and EPR (Free Lock).
Hard zinc bridge with steel saddles. This bridge has a string spacing of 18mm and measures 93,3 x 53mm. It is suitable for a string feed from the back of the bridge, but also if you prefer to have the strings running through the body. That's smart design by Gotoh!
Hard zinc bridge with steel saddles. This bridge has a string spacing of 18mm and measures 93,3 x 53mm. It is suitable for a string feed from the back of the bridge, but also if you prefer to have the strings running through the body. That's smart design by Gotoh!
These jack plates are a standard for custom instrument makers. Screws included. Jack hole diameter is 3/8" (9.50mm). The mounting screw holes are on 1-7/16" (37mm) centers. - Mounting Screws Included - Metal Construction - Made in Japan
These jack plates are a standard for custom instrument makers. Screws included. Jack hole diameter is 3/8" (9.50mm). The mounting screw holes are on 1-7/16" (37mm) centers. - Mounting Screws Included - Metal Construction - Made in Japan
Traditional jack plate found on Gibson® Les Paul® and many others. Jack plates are 1-11/32" (34.3mm) square, with mounting holes on 1" (25.4mm) centers. The hole for the jack is 3/8" (10mm) diameter. Plated brass plates have a slight curve or bend to conform to the rounded sides of a Gibson® Les Paul®, and include matching mounting screws. - Mounting...
Traditional jack plate found on Gibson® Les Paul® and many others. Jack plates are 1-11/32" (34.3mm) square, with mounting holes on 1" (25.4mm) centers. The hole for the jack is 3/8" (10mm) diameter. Plated brass plates have a slight curve or bend to conform to the rounded sides of a Gibson® Les Paul®, and include matching mounting screws. - Mounting...
String retainer set with a gold finish. Made in Japan.
String retainer with a gold finish. Made in Japan.
String retainer with a chrome finish. Made in Japan.
Finish :Aged NickelString Post :STANDARDButton :SL (Aged processing)Gear Ratio :1 : 15Weight :23.7 g/pc 3:3 Array
Configuration: 6 Right Gotoh MG-T traditional locking system with a knurled screw on the back of the machine head Closed construction Buttons: Small, metal Gear ratio: 1:16 Shaft length: 18.5 mm Length of 2nd shaft (staggered): 20 mm Bore: 10 mm Attachment: Screws and hex-head banjo bolts Screw tab angle: 45° SG381-07-C-R6 MG-T Surface: Chrome Includes...
Finish: ChromeArray: 6-in-lineString post: StandardGear ratio: 1:16