Catalog
Loading...
Ormsby sets a new standard for...
Utility pedals, AB / ABY swtichers, tap-tempo controllers and different footswitches for guitars and effects
Click HERE to browse Bypass Loopers and MIDI Controllers
Click HERE for Amplifier Footswitches
A good solid A/B box can be a guitarist's best friend. JHS make theirs from a Hammond 3.8 x 9.1 cm metal enclosure with high quality jacks and switch. JHS also includes a dual color (red/blue) LED to let you know by sight if you're using A or B. This is very practical in a live situation.
Need to split your signal? Don’t want to settle for a passive device that will kill your tone and cause signal loss? This is what you need! This little box of magic takes your input signal and splits it into two always-on outputs that are buffered so you don’t lose clarity or tone in any way. Plug your guitar in and use one output to send your clean...
If your amp has a “send/return” effects loop simply connect the input to your SEND and the output to your RETURN. You can use the LBAB to saturate your preamp section and get some cranked tube tone at bedroom levels!
Simple, solid and very useful. Have you ever needed a simple mute switch with no frills? Just hit the footswitch and anything plugged into the input is made 100% silent.
Use the Red Remote with select JHS Pedals to remotely activate the on-board toggle found on the pedal itself. By connecting the Red Remote to a Red Remote equipped pedal with any 1/4” instrument cable, this essentially acts as an on-the-fly switcher to give you more tonal options in any setting.
The JHS Pedals Active A/B/Y is the perfect solution when you need to send one signal to two outputs with the ability to choose either output (or both) on the fly.
The JHS Pedals Summing Amp gives you the ability to take two inputs and blend them into one output. Simply plug into the two marked inputs and then plug in your single output and you’re ready to go. From two signals the Summing Amp creates one mono signal. This is perfect for putting effects in parallel so that they are not affected by one another.
The Source Audio Tap Tempo Switch is a simple footswitch that adds significant functionality to every One Series pedal in the Source Audio collection. It offers on-the-fly tap tempo control over modulation rates for the Vertigo, Lunar, Gemini, and Mercury as well as delay times for the Nemesis. The Tap Tempo also makes it possible to externally scroll...
The Switchblade Pro is a deluxe switching box featuring true mechanical bypass, soft switching, high quality and low noise buffers, volume controls for all input signals, high headroom and a multitude of possible configurations for all your signal routing needs. This compact pedal is a versatile and indispensable tool!
MultiSwitch Plus can be configured in several different ways to extend floor control of compatible Strymon pedals. Depending on the selected mode and the pedals connected, you can recall presets, change banks, operate TimeLine’s looper, remotely tap tempos, and more.
• Increases functionality and control over compatible devices• Compact, durable, easy-to-use• Works with EHX pedals and those made by other makers• No power required• Comes with a TRS (Tip-Ring-Sleeve) cable
Triple Switch provides 3 momentary and normally-opened switch contacts that you can use to unlock the full potential of controls and features of your pedals that have external control capability.
Passive Line Isolator and Direct Injection device Converts ¼” unbalanced input to XLR balanced output For interfacing with your recording interface or FOH mixer Works perfectly with amp-in-a-box devices e.g. Walrus Audio ACS1 Stompbox format for easy integration on pedalboards Flat frequency response from 20Hz-20kHz Custom wound transformers for low THD...
Re-Amp box allows to send recorded guitar, drums, or other instrument tracks from your recording session through pedals or different amp combinations Explore new ways to experiment with your songs - rediscover the joy and creativeness of using outboard effects-gear during your DAW sessions. Instead of spending precious studio time trying to find a good...
A/B switch for effects pedals and signal routing Can be used as input or output selector Inputs and outputs can be used in both directions True bypass Bypass footswitch Status LED Metal housing 1x 6.3 mm mono input jack 2x 6.3 mm mono output jack Power supply via optional 9V DC adapter, 2.1 x 5.5 mm barrel plug, polarity (-) center Passive operation...
Main Features:Passive ABY pedal with active switching Sends an input to two separate outputs, separately or combined Sends two inputs to one source, separately or combined True Bypass Active silent relay-based soft switching, heavily reduces mechanical noise and pops Omnidirectional for 2 into 1 or 1 into 2 operation Distinct LED colours, to...
Main Features:Passive Stereo ABY pedal, with active switching Sends a stereo input to two separate stereo outputs, separately or combined Sends two stereo inputs to one stereo source, separately or combined True Bypass Active silent relay-based soft switching, heavily reduces mechanical noise and pops Omnidirectional for 2 into 1 or 1 into 2...