Keeley Mk3 Driver Andy Timmons

The Mk3 Driver combines a three-control blues driver circuit with two switches for the voicing of Drive and Tone characteristics. Robert and Andy developed these switches to give players a broad range of drive tones. The Drive toggle engages two germanium diodes for a smoother, slightly compressed drive. Switch to Andy’s clipping style for a brighter and more articulate attack. Every part of the circuit has been optimized for tone and the demanding needs of a recording and touring artist such as Andy Timmons. Simply adding the Mk3 Driver to your pedalboard will make your rig sound better. This professional grade overdrive can be switched between true-bypass and buffered bypass at any time.

- Overdrive effect pedal
- Germanium based overdrive crafted with Andy Timmons direction
- AT/RK Tone Switch cuts lows for a clarity or boosts low-end for power
- AT/RK Drive Switch alternates between asymmetrical silicon to dual germanium diodes
- switchable between true bypass or completely noise free buffered bypass via footswitch
- 9 to 18 Volt operation for huge dynamic range and headroom
- controls for Tone, Drive and Level
- switch for Tone AT / RK, Drive AT / RK
- Bypass footswitch
- status LED
- aluminum housing
- 6.3 mm mono jack input / output
- power supply via optional 9V - 18V DC power supply, 2.1 x 5.5 mm barrel plug, polarity (-) inside
- battery operation not supported
- current draw 27 mA
- dimensions (L x W x H) 127 x 67 x 70 mm / 5" x 2.6" X 2.8"
- weight 290 g / 0.64 lbs
- made in USA