Seymour Duncan Pickup Booster

The Resonance Switch makes the pedal interact directly with your pickups, allowing those with single-coils to flip a switch for a vintage humbucker sound that's perfect for classic rock or blues. With another flip of the switch you can get a high-output humbucker tone for rip roaring solos or for blasting gain out of a tube amp. You can use the Pickup Booster for a clean, buffered boost with more headroom or you can fatten up a humbucker for maximum saturation and sustain. Like the Dirty Deed, Vapor Trail and 805 Overdrive, each Pickup Booster is assembled in Santa Barbara, California and is True-Bypass.

Specifications:

• Type of circuitry: Fully discrete, Class A
• Gain range: 0 to 25 dB
• Bypass: True bypass
• Pickup Resonance Switch: Makes a single coil pickup sound like a vintage humbucker ("1") or high output humbucker ("2").
• Frequency Response: -3dB at 30Hz and 38 kHz
• Distortion: < 0.02% at 200mV RMS output
• Noise: -120 dBV (referred to input with gain set at 25dB)
• Input impedance: 250K Ohms (when effect is "on")
• Output impedance: 150 Ohms
• Power: 9V battery or external 9 to 18V Regulated DC Adapter (center negative)
• Current consumption: 4.5mA @ 9V (when LED is "on"), 3mA @ 9V (when LED is "off"). Currents at 18V are 11mA and 8mA, respectively.
• Dimensions: 2.61" X 4.90" X 1.45"
• Weight: 0.8lb. without battery