Cioks on Taani firma, kes on spetsialiseerunud profesionaalsete mitme-väljundiga voolualaldite tootmisele kitarriefektide jaoks. Kõik alaldid on toodetud Euroopa Liidus.
CIOKS Flex 1 – 30cm (12″) with 5,5/2,1mm centre negative angled DC plug (black)
CIOKS Parallel adapter Flex – 10cm / 4″ (sand grey). By using two isolated outlets the Parallel adapter Flex gives you the sum of max. currents of the two isolated outlets used. This adapter cable should be used in combination with any of CIOKS standard Flex cables if you need to power pedals with higher current needs. It gives you not only the higher...
CIOKS Flex 1 – 15cm (6″) with 5,5/2,1mm centre negative angled DC plug (black)
CIOKS Flex 1 – 50cm (20″) with 5,5/2,1mm centre negative angled DC plug (black)
The Heart and SOL of Your Pedalboard SOL is the ultimate solution for bringing life to a small to medium-sized pedalboard setup, especially if you are using power-hungry pedals. SOL is the smallest mains-powered switch-mode power supply we make at CIOKS (no wall-warts here) and the no-frills design plus massive power will leave you free to focus on your...
Type 3 Flex kaabel on kollane ja keskelt negatiivse polaarsusega 5,5/2,5mm DC pistikuga. See kaabel sobib kui tahad toita Line6 Stomp seeria pedaali CIOKS DC7 voolualaldist.
Type 1 Flex cables are black and fitted with a centre negative 5,5/2,1mm DC plug. 80cm cable length.
Extension Flex is a 50cm cable with two RCA plugs, a male one in one end and a female at the other. You can use this Flex cable to make any other Flex cable 50cm longer.
This split adapter Flex makes it possible to power two pedals using only one outlet of the power supply but where the cable length and plug type can be chosen individually for each pedal. CIOKS Split adapter Flex – 10cm / 4″ (black)
CIOKS 3-way daisy chain Flex – three 5,5/2,1mm centre negative DC plugs, 50+30+30cm / 20″+12″+12″ (black)
GRIP v.2.0 allows for drill-free mounting of select CIOKS power supplies underneath Pedaltrain boards. GRIP v2 is the latest version of CIOKS GRIP and is compatible with DC7, SOL, CIOKS 8 Expander, ADAM Link and DC5 (both discontinued).
CIOKS Split Flex – two 5,5/2,1mm centre negative DC plugs, 30 & 50cm / 12″ & 20″ (black)
Cioks DC7-l on 7 väljundit mis suudavad anda kokku kuni 6 vatti, et toita kõiki pedaale. Efektid kõlavad võimsamalt ja lõikavad läbi igasuguse helimiksi. Lisaks on võimalik eksperimenteerida ükshaaval vooluga, sest igal väljundil on 4 muudetavat pingelülitit. See annab võimaluse lasta pedaalidel kõlada pehmemalt ja tagasihoidlikumalt või lasta neil...
CIOKS 4 power supply is the perfect companion to CIOKS DC7 in case you would like four additional outlets with four selectable voltages on each tap (9, 12, 15 and 18V DC) which can each deliver 660mA at 9V DC. Simply connect CIOKS 4 to your CIOKS DC7 via its 24V outlet and you are good to go.
CIOKS 8 on nende suurim voolujaamalaiendi ja pakub 8 isoleeritud väljundit millest igaüks annab välja 9V DC 660mA. Kõik väljundid võimaldavad nelja erinevat vahetatavat pinget (9, 12, 15 või 18V). Eelkõige on CIOKS 8 mõeldud DC7 voolujaama laienduseks kui on tarvis lisaväljundeid. Kui otsid ülivõimsat voolujaama lahendust, et toita suurt pedalboard-i,...
When you are building the ultimate pedalboard you need the ultimate in flexible, powerful and reliable power supply and the combination of the CIOKS DC7 and the CIOKS 8 Expander is just what the doctor ordered. With this combo you get fifteen isolated outlets in total with four switchable voltages on each outlet and a USB outlet for your smartphone or...
CRUX is a small 9/12V adapter which allows DC7 users to connect a power-hungry multi effects device such as (for instance) a Line 6 HX Stomp XL or a Neural DSP Quad Cortex to the 24V output on DC7. Using a HX Stomp or a Quad Cortex with DC7 has previously only been possible by using two or more 8800 Parallel Flex cables so CRUX therefore frees up these...
DC10 is a professional multi-output power supply for effect pedals. It has 10 regulated and well-filtered DC outlets configured in 8 isolated sections. With a total of 1.600mA it’s a perfect solution for bigger rigs with pedals only using a DC power source. Its three powerful sections with 400mA each will power pedals with special requirements. Selectable...
Cioks Mini-Grip klamber Cioks 4 voolualaldi kinnitamiseks Pedaltrain pedalboard-ide külge.
Type 6 Flex cables are black and fitted with a 9V battery snap or clip if you like. This Flex cable should be used with 9V battery powered pedals which don’t have an adapter input socket e.g. vintage Wah pedals or some MXR or Roger Meyer fuzz pedals. This Flex cable is available in two cable lengths 30 or 50cm.
Two powerful AC sections with 800mA each offer voltages 9, 12 and 16V AC. If you have one or two pedals in your setup, which requires an AC power source, AC10 is the right choice. It powers all vacuum tube pedals from Electro-Harmonix, Kingsley, older Blackstar HT series, the Whammy or Jamman. If you only have one AC pedal, you can convert one of the AC...
With this cable, you can combine two Cioks power supply outputs and double the voltage going to the pedal. For example, if you combine two 9V outputs and combine them to get 18V.