Kemper Profiler Remote

PROGRAMMING REMOTE

Four buttons, individually assignable for each Rig, can control multiple effects at the same time. In order to associate an effect with a button, all you need to do is hold the Effect Button of your choice on the Remote and press an effect module button on your PROFILER at the same time. Done. Status color LEDs give you a great overview on assignments and purpose of a switch/ pedal.

MADE WITH TOURING IN MIND

The Remote connects to PROFILER with a single cable. We are using a Neutrik® etherCON® connector to ensure the most robust connection possible on stage. By using a powered ethernet hub, distances in excess of 100 m (300 ft) can be bridged with a simple Ethernet cable.

CONTROLLERS AND SWITCHES

The four TRS connectors on the rear panel can be used for expression pedals and switches. Pedals can be used to control volume, wah, pitch and even combinations of multiple continuous parameters - all freely configurable by Rig. Multiple functional assignments can be assigned per expression pedal - for instance, volume + wah + pitch can easily be assigned to the one pedal.

ADMINISTER OTHER EQUIPMENT

The Remote allows you to trigger external MIDI gear by sending program change messages from the MIDI OUT of your PROFILER.

The Remote connects via a single Ethernet cable to your PROFILER. No extra power supply is required, and the included cable is seven meters long (21ft). Longer distances are possible if required.

Up to four continuous foot pedals can control multiple parameters inside your PROFILER. Four buttons switch effects on and off. Setting it up is easier to learn than putting a new contact into your cell phone. Click to choose, assign, done.