Poes saadaval Muud varuosad kitarridele Allparts Cloth Wire Kit Allparts GW-0832-000 12,20 € Vintage style cloth covered wire set. Vintage Style, push back, cloth covered wire, 22 gauge, unshielded, single conductor, stranded wire with a waxed braided cotton outer insulation. Includes 3.5 ft of black GW-0820-023 wire and 3.5 ft of white GW-0820-025 wire. Lisa ostukorvi
Poes saadaval Muud varuosad kitarridele Allparts Backplates for Gibson LP Black Allparts PG-0814-023 22,40 € Back Plate & Switch Cover for Les Paul® Black 1-ply Lisa ostukorvi
Pole laos ja pikk tarneaeg Muud varuosad kitarridele Gotoh CP-10 Cosmo Black Control plate Gotoh CP-10-CK 19,00 € Kosmo must viimistlusega juhtpuldi paneel. Valmistatud Jaapanis Vaata
Poes saadaval Muud varuosad kitarridele Gotoh NBS-3 Black Neckplate Gotoh NBS-3-B 14,00 € Musta viimistlusega kitarri kaela kinnitusplaat.Valmistatud Jaapanis. Lisa ostukorvi
Tarneaeg 2-3 nädalat Muud varuosad kitarridele Fender Standard Medium Jumbo Guitar Frets Fender 0991998000 15,30 € Standard guitar fret wire pre-cut into 24 pieces and pre-radiused to 9.5". Lisa ostukorvi
Poes saadaval Muud varuosad kitarridele TAD Sprague Orange Drop Capacitors 0,047uF Tube Amp Doctor V-47600 3,50 € Sprague "Orange Drop" #715P 600 volt Capacitor. Sold per 1pc. TAD Sprague/Orange Drops have low tolerances (3%), expanded temperature range (-55°C to +105°C) and with extra long wires suitable for point-to-point wiring. The distinctive tone of the TAD Orange Drops is full and smooth yet clear and shiny. Used for guitar tone control optimization.... Vaata
Tarneaeg 1-2 kuud Muud varuosad kitarridele Allparts Truss Rod Nut for Gibson Allparts LT-0660-008 4,10 € Truss Rod Nut for Gibson Guitars, Brass 10-32 Lisa ostukorvi
Poes saadaval Hooldusvahendid Allparts 5/16 tolli kaelavõti Allparts LT-4216-000 11,00 € 5/16 inch Box Truss Rod Wrench, suitable for many Gibson guitars. With Phillips Head Screwdriver on End. Socket length ~.375" Outside diameter of the socket is 11.05 mm. The distance from the top of the tool's arm to the end of the socket is 12 mm. Use these measurements to determine if this tool will reach your truss rod nut. Lisa ostukorvi