Poes saadaval Pistikud ja katted Gotoh JCS-1 Black Jack cover Gotoh JCS-1-B 8,00 € Gotoh Jack Plate for Stratocater Black finish. Mounting screws included High quality Made in Japan. Lisa ostukorvi
Poes saadaval Muud varuosad kitarridele Gotoh TLB-1 Chrome String bushing set Gotoh TLB-1 SET-C 6,00 € 6 pcs/set Lisa ostukorvi
Poes saadaval Muud varuosad kitarridele Gotoh NBS-3 Chrome Neckplate Gotoh NBS-3-C 9,00 € Kroom viimistlusega kitarri kaela kinnitusplaat.Valmistatud Jaapanis. Lisa ostukorvi
Poes saadaval Muud varuosad kitarridele TAD Sprague Orange Drop Capacitors 0,047uF Tube Amp Doctor V-47600 3,50 € Sprague "Orange Drop" #715P 600 volt Capacitor. Sold per 1pc. TAD Sprague/Orange Drops have low tolerances (3%), expanded temperature range (-55°C to +105°C) and with extra long wires suitable for point-to-point wiring. The distinctive tone of the TAD Orange Drops is full and smooth yet clear and shiny. Used for guitar tone control optimization.... Vaata
Poes saadaval Muud varuosad kitarridele Allparts Nickel Bass Ferrules Allparts AP-0287-001 8,20 € String Ferrules, 4 pieces, for Bass, Nickel, half inch flange diameter, 3/8 in. diameter hole required, 13/32 in. total length. Lisa ostukorvi
Tarneaeg 2-3 nädalat Hooldusvahendid Martin 2-Way Truss Rod Wrench Martin 13WR0001 10,00 € The two way truss rod wrench can be used on both the two way adjustable rod necks or single adjustable rod. 5mm Lisa ostukorvi
Poes saadaval Muud varuosad kitarridele Gotoh NBS-3 Gold Neckplate Gotoh NBS-3-GG 17,00 € Kuld viimistlusega kitarri kaela kinnitusplaat.Valmistatud Jaapanis. Lisa ostukorvi
Tarneaeg 1-2 kuud Muud varuosad kitarridele Allparts Truss Rod Nut for Gibson Allparts LT-0660-008 4,10 € Truss Rod Nut for Gibson Guitars, Brass 10-32 Lisa ostukorvi
Poes saadaval Hooldusvahendid Allparts 5/16 tolli kaelavõti Allparts LT-4216-000 11,00 € 5/16 inch Box Truss Rod Wrench, suitable for many Gibson guitars. With Phillips Head Screwdriver on End. Socket length ~.375" Outside diameter of the socket is 11.05 mm. The distance from the top of the tool's arm to the end of the socket is 12 mm. Use these measurements to determine if this tool will reach your truss rod nut. Lisa ostukorvi