Poes saadaval Muud varuosad kitarridele Gotoh NBS-3 Black Neckplate Gotoh NBS-3-B 14,00 € Musta viimistlusega kitarri kaela kinnitusplaat.Valmistatud Jaapanis. Lisa ostukorvi
Pole laos ja pikk tarneaeg Sildade kruvid ja vedrud Gotoh PSP Power Springs Tremolo spring set Gotoh PSP-3SET 5,50 € Spring Rate :20% up 3 pcs/set The tremolo is kept neutral by the balance between string tension and the coil spring attached to its block. As return to a neutral point depends merely on the strength of the coil spring, if the spring is not entirely reliable, the guitar will not accurately come back into tune, especially after pushing the arm down. The... Vaata
Poes saadaval Nupud Gotoh VK-3 Gold Dome knob Gotoh VK-3-GG 6,00 € Kuld viimistlusega pote nupp. Valmistatud Jaapanis Lisa ostukorvi
Poes saadaval Pistikud ja katted Gotoh JCS-1 Gold Jack cover Gotoh JCS-1-GG 10,00 € Kullatud viimistlusega kitarri väljundi kateValmistatud Jaapanis Lisa ostukorvi
Pole laos ja pikk tarneaeg Sillad ja roobid Gotoh GE1996T-40 Gold Locking tremolo unit Gotoh GE1996T-40-GG 159,00 € Block Height: 40mm String Spacing :10.8mm Saddle Material :Steel Saddle Radius:350mm Suitable Arm :F3 Vaata
Pole laos ja pikk tarneaeg Muud varuosad kitarridele Gotoh BB-02 Battery box Gotoh BB-02 11,00 € Battery Box for 9V Battery Vaata
Poes saadaval Kitarripingutid Gotoh SGS510Z-S5L-MG Black Machine heads Gotoh SGS510Z-S5L-MG-B 125,00 € Array: 6-in-lineFinishes : BlackString Post :MG (Locking)Gear Ratio :1 : 18 Lisa ostukorvi
Poes saadaval Pistikud ja katted Gotoh JCS-1 Chrome Jack cover Gotoh JCS-1-C 5,00 € Gotoh Jack Plate for Stratocater Chrome finish. Mounting screws included High quality Made in Japan. Lisa ostukorvi
Pole laos ja pikk tarneaeg Pistikud ja katted Gotoh JCB-4 Gold Jack cover Gotoh JCB-4-GG 9,00 € Traditional jack plate found on Gibson® Les Paul® and many others. Jack plates are 1-11/32" (34.3mm) square, with mounting holes on 1" (25.4mm) centers. The hole for the jack is 3/8" (10mm) diameter. Plated brass plates have a slight curve or bend to conform to the rounded sides of a Gibson® Les Paul®, and include matching mounting screws. - Mounting... Vaata
Pole laos ja pikk tarneaeg Pistikud ja katted Gotoh JCB-2 Black Jack cover Gotoh JCB-2-B 6,00 € These jack plates are a standard for custom instrument makers. Screws included. Jack hole diameter is 3/8" (9.50mm). The mounting screw holes are on 1-7/16" (37mm) centers. - Mounting Screws Included - Metal Construction - Made in Japan Vaata
Poes saadaval Pistikud ja katted Allparts Gold Metal Jackplate For Les Paul Allparts AP-0633-002 13,20 € Jackplate for Les Paul, Gold, Metal, with Screws, Jack hole diameter 9.5mm with the mounting screw holes spacing 25.4mm. The jackplate has a slight curve to match the bodys curved sides. Lisa ostukorvi
Poes saadaval Pistikud ja katted Gotoh JCS-1-RLC Aged Chrome Jack cover Gotoh JCS-1-RLC-AC 8,50 € Vanutatud kroom finish.Kaasas kruvid. Lisa ostukorvi
Poes saadaval Pistikud ja katted Allparts Rectangular Jackplate Chrome Allparts AP-0637-010 4,00 € Ristküliku kujuline jack plate kerge kurvatuuriga. Augu diameeter 9.5mmKruviaukude vahe 27.5mm x 19,5mm. Lisa ostukorvi
Poes saadaval Pistikud ja katted MEC 1/4 Mono Jack Gold Warwick M 50111 G 10,00 € Connector Type: 6.3 mm / 1/4" TS (mono) jack socket Design: Open Mounting Compatibility: Suitable for jackplate or pickguard installation Mounting Diameter: 9 mm Thread Size: M9 x 5 mm Material/Finish: Gold-plated Included Accessories: 12 mm nut and washer Lisa ostukorvi
Poes saadaval Pistikud ja katted Gotoh JCB-2 Chrome Jack cover Gotoh JCB-2-C 6,00 € These jack plates are a standard for custom instrument makers. Screws included. Jack hole diameter is 3/8" (9.50mm). The mounting screw holes are on 1-7/16" (37mm) centers. - Mounting Screws Included - Metal Construction - Made in Japan Lisa ostukorvi
Poes saadaval Pistikud ja katted Gotoh JCB-4 Chrome Jack cover Gotoh JCB-4-C 6,00 € Traditional jack plate found on Gibson® Les Paul® and many others. Jack plates are 1-11/32" (34.3mm) square, with mounting holes on 1" (25.4mm) centers. The hole for the jack is 3/8" (10mm) diameter. Plated brass plates have a slight curve or bend to conform to the rounded sides of a Gibson® Les Paul®, and include matching mounting screws. - Mounting... Lisa ostukorvi